EXPERIENCE

 

Worley – LYB Wesseling DE     

Construction manager II E&I coordinator                                                                                                            

  • Supervision of electrical and instrumentation subcontractors during construction of 25kV substation and compressor 9MW motor installation.
  • Work inspections, ATEX inspections
  • Safety walkdowns
  • Technical clarifications
  • Work coordination between various scopes and disciplines

Air Liquide E&C Krakow PL – Stade DE     

E&I lead for construction of new POX reactor

  • Daily coordination with subcontractors and client
  • Work permits and RAMS
  • Supervision over engineering department and contracts
  • RFI’s , ITP’s , QA/QC checks
  • Approval of extra works

BP Germany Gelsenkirchen 
Construction Management

• Coordination between many microprojects. Close cooperation with projects management and Head of DCS projects.
• Supervision during DCS demolition scope.
• Coordination and supervision during loop – checks.
• Site surveys and technical clarification between EPC contractor and Operations Team
• Preparation for next shut-downs.
• Planning and preparation for DCS controllers and other control devices movement to different cabinets. Site shutdown time optimalisation.

BP , Stork/FLUOR Germany Gelsenkirchen 
Troubleshooting / Commissioning Manager

• Daily coordination of subcontractor and DCS engineers and technicians during TAR – DCS system migration.
• Managing of troubleshooting team, work preparation and punch list analysis.
• Daily meetings with client regarding punch list and proposing solutions.
• Close cooperation with engineering department, problems clarification and solution finding.
• Active in the field helping problem solving, working with Schneider DCS engineers and screen operators.

Cargill , De Smet Engineers & Contractors (Poland and Belgium) 
E&I Leading Supervisor

▪ Representing client in front of subcontractor
▪ Daily construction coordination meeting
▪ Reply to RFI , MAF,
▪ Daily inspections and scope clarifications
▪ Approval of payment certificates and extra work costs
▪ RAMS review and approval.

ERC Emissions-Reduzierungs-Concepte GmbH

E&I Commissioning Deputy Manager

  • Acting as Commissioning Manager during start-up of SCR
    installation on Vasilikos power plant in Cyprus.
  • Daily tasks planning
    for commissioning technicians and engineers.
  • Coordination meetings with
    all disciplines, client and third party project engineers.
  • Organisation
    of procedures, documents and being active part of commissioning team in
    the field.
  • Operating DCS.

TRS Staffing Solutions  –
Electrical and Instrumentation Supervisor

  • This time I wasworking on data centre project for Fluor Corporation an EPC main
    contractor.
  • My day to day duties are related to area coordination on
    main substation.
  • Preparation of work notification (work permit to access
    client area) coordination of all disciplines in preparation to
    installation new 220/22 kV transformer, new switchgears and all
    infrastructure related to new installation.

Engie-Fabricom /
Siemens UK / Innogy – Triton Knoll
(Belgium-Antwerp) 

Deputy Construction Manager/
Electrical Supervisor/ Commissioning Permit
Coordinator

  • Follow up all electrical activities; Progress, quality control, safety supervision and controlling and calculating extra work.
  • Responsible of Work Permits / commissioning permits, RAMS,
    tool box talks,
  • Daily construction meetings with client and coordination
    inside joint venture.
  • Supervision over subcontractor forces, work pack preparation and engineering/design clarifications.
  • Support during GIS installation 220 kv and 66 kv.

E&I Inspector at Exxonmobil /
Fluor / Bureau Veritas

  • E&I Inspections , creation of reports,
    checking newly build installation to Atex standards.
  • Review of quality documentation.
  • Witnessing electrical test’s (megger, hi-pot, grounding etc.)
  • Checking installation to IEC 60079…standards

EI&C Supervisor – BP / Actemium TAR
2017

  • Supervision during TAR 2017 (turnaround / shutdown)
    at BP site in Europort.
  • Working for subcontracted company Actemium
    specializing in Electrical, Instrumental and Control systems.
  • Daily supervision of electricians, instrumentation technicians and steel
    workers about 55 people (multinational environment) divided by 3
    supervisors.
  • Daily planning scope of work for dedicated workforce.
    Coordination between planning and quality department as well as with
    other subcontractors.
  • Checking discrepancy and finding solutions.
  • Daily
    progress reporting and planning ahead meetings. Preparation of
    work-packs and quality control after accomplished tasks.

Site
Electrical Engineer / Supervisor – Saudi TKT Company Limited / Varian –
Proton Therapy System

  • Site Supervision during construction phase of Proton Therapy System for Varian in King Fahad Medical City in
    Riyadh.
  • Under my supervision I have three working foremans and 25
    technicians working on different systems starting from HV switchgears,
    UPS, LV systems, instrumentation and controls, RF system and IT.
  • I’m doing daily documentation clarification finding and proposing solutions
    in technical matter.
  • Identifying problems in documentation, checking for
    changes, problems and variations in between documentation for
    construction and installation instructions, master cable list, wiring
    diagrams and cable schedules, checking documentation defects and looking
    for clarification.

Dornan/Oradeo – Site Supervisor-DATA
CENTRE Project (Netherlands)

  • Supervision of 19 electricians
    during construction phase of data center.
  • Cable pulling, cable trays, termination, inspections and quality checks, RAMS, Permits, toolbox
    talks etc.
  • Safety work planning,
  • Logistic and coordination.
  • Contact withclient and other contractors and trades.

SOCOTEC OIL &
GAS – Freelancer Electrical Inspector

ELECTRICAL
INSPECTIONS

Proofest International s.r.o. – Freelancer
Electrical Inspector

ELECTRICAL INSPECTIONS

RINA
– Freelancer Inspector / Auditor

Inspections and audits in
construction companies. Certification checking and approving. Checking
ISO standards and procedures.

INTERTEK – Freelancer
Electrical Inspector

Inspections of electrical equipment.
Checking documentation. Witnessing tests. Creating reports. FAT. SAT. GE
– approved inspector.

BILFINGER/BABCOCK NOEL – PGE Power
Plant Turow – Commissioning Engineer, Guaranty Engineer on installation
of FGD – flue gas desulphurization (Germany and Poland) E&MSR&ICA Engineering

  • Technical support
    during construction phase, consultations, supervision of subcontracted
    forces, commissioning, meetings with client, translation and explanation
    of technical documentation, providing a training for operators, dealing
    with faults and punch list, arranging repairs with subcontractors and
    keeping right documentation flow.
  • Inspections, FAT.

PETROFAC/TOTAL Gas Plant – Site supervisor (Shetland
Island’s UK)

  • Daily base technical drawings, specifications analysis.
  • Site documents preparation with required
    updates.
  • Assemblies and material check.
  • Fabrication and site erection overall supervision.
  • Daily progress, safety and quality reporting.
  • General supervision on the task and dedicated labor
    forces. 

TAQA ENERGY / FLUOR Gas storage
plant – Instrumentation Technician, QA/QC Inspector.
(Netherlands)

  • Testing and commissioning of
    instrumentation, control system DCS and PLC’s, UPS/Batteries, LV
    Switchboards, Cables, at newly build gas storage plant.
  • Electrical installation quality checking to ATEX standard.

Permasteelisa
Gartner Qatar – MEP Supervisor Electrical supervisor
(Qatar)

  • Electrical supervision of the
    subcontractor on the newly built airport in Doha-Qatar.
  • Drawing checking, consultations, coordination, helping in design, technical
    clarification, quality control, commissioning, supervision of special
    systems ELV: light control systems, access control, fire alarm, HVAC,
    BMS, public address, Voice and Data, UPS and CCTV. (Up to 120
    electricians, foremen, supervisor’s)

Voith India – Daimler India – Electrical
Supervisor European Expert (INDIA)

  • Providinga training for local contractors, supervision in quality aspect, fault
    finding, testing and commissioning, rectifying faults, supervision of
    facility management team HV and LV systems, UPS and Diesel
    Generator.

Self-employed – Project – Site Management,
Supervision (Poland)

Duties included: All aspects of
electrical work industrial and civil, LV Switchboards, HVAC, intelligent
house, lights. Projects management and supervision. Circuit design.
Testing and inspections, pre-commissioning and commissioning of control
systems, sensors and instruments.

ABB Sunderland – Working
foreman (UK)

Duties include: Wiring control panels, LV
switchgears, assisting during tests and commissioning, preparing
production, consultations with senior engineers.

Wirac
Automation Ltd. – Electrical Supervisor (UK)

Duties include:
All aspects of electrical work industrial wiring (gas & oil), panel
building and design, electrical and mechanical fitting, designing
electrical circuits, programming PLC’s, supervising installation team,
testing and commissioning of control systems and
instrumentation.

Promat Power Services. Electrician /
Supervisor (UK).

Duties included: Supervision on wiring and
fitting HV control panels for HV switchgear in substations  on
electrical plants mainly wind farms, assembly of electrical gears, steel
– work, wiring telecom boxes and all aspects of electrical
installations, LV Switchboards, Cables. Assisting during tests and
commissioning of HV switchgears.

E.J. Stone Ltd.
Maintenance Electrician (UK).

Duties included: Maintenance
of facility and operation of fully automatic production line forklift
driving, diagnosing and repairing electrical and mechanical
faults.

KER C.O Ltd. (Tele-informatics’
Firm) Electronic Surface Fitter and Programmer/Post-Production Quality
Controller. (Poland)

Duties included: Programming and
testing post production modules, quality control, repair errors and
faults during
production.